Peacock key holder

Step 1

• Draw a semi-circle measuring 7” height and 12” width as shown in the image.
• Draw your design based on the space created as shown.
• Use pencil and scale to draw.

Step 2

• Trace the outer semi circle onto an OHP sheet as seen in the image
• Use marker to draw the semi circle.

Step 3

• Paint the semicircle using Fevicryl acrylic color white. Use a round brush to paint the surface.
• let it dry
• Once the paint has dried, trace the design onto the semicircle as seen in the image

Step 4

• Cut the semicircle using scissors as seen in the image given
• Use paper scissors to cut the semicircle.

Step 5

• Take Fevicryl mould it and create a shape according to the semicircle that we have created.
• Make sure the mould it surface is evenly spread.

Step 6

• Cut The corrugated sheet to the size of the semicircle that has been created previously
• Refer to the image given
• Use paper scissors to cut the corrugated sheet
• Cut 2 such shapes

Step 7

• Place the holder as shown in the image
• Use a screwdriver to screw the nails and secure the holder

Step 8

• Stick the mould it piece and corrugated sheets together using Fevicryl fabric glue
• Let it dry
• Make holes at the bottom of the molded piece as seen in the image
• Leave one inch gap between each hole.
• Use a compass to make the holes and make sure it goes through the corrugated sheets as well

Step 9

• Start painting the design using black paint and white paint as shown in the image
• let it all dry
• Stick a big round mirror in the center of the design as seen in the image
• Use Fevicryl fabric glue to stick it
• let it dry

Step 10

• Paint the edges of the semicircle using black paint as seen in the image
• Do it all around
• let it dry

Step 11

• Paint the back of the semicircle using black paint as well
• let it all dry

Step 12

• Start sticking various materials on the semicircle according to the design
• Use beads, mirrors, Cords, mould it to create patterns on the design as seen in the image
• Stick all these materials using Fevicryl fabric glue
• let it all dry

Step 13

• Add more detailing to the design by using more cords, mirrors etc
• Use Fevicryl 3D outliner white and black as seen in the image
• let it dry

Step 14

• Make tiny Fevicryl mould-it balls and place them on the holes created on the semicircle as seen in the image
• Insert the key hook through the balls into the hole as seen in the image
• Secure them together using Fevicryl fabric glue
• Let it dry

Step 15

• Paint black lines around the hooks as seen in the image.
• let it dry

Step 16

• Stick small mirrors around the hooks as seen in the image
• Use a twisted cord to stick around the semicircle as seen in the image
• Use Fevicryl fabric glue to stick them
• let it dry

Step 17

• Make two holes at the back of the semicircle as seen in the image
• Apply Fevicryl fabric glue on top of it
• Make two mould-it balls and stick them on the holes I seen an image
• Let it semi dry

Step 18

The Peacock key holder is ready to be used.