Lace Work Jute Mat
Click to rate this post!
[Total: 0 Average: 0]
Lace Work Jute Mat
Fevicryl Acrylic Colour - White 27, Fevicryl 3D Cone Outliner - White 707,Fevicryl No Stitch Fabric Glue, Fine Art Brush - Round No. 7, Blue Circular Jute piece of 9
Trace the design on the blue fabric using white carbon.
Fix the embroidery frame to the cloth. Stretch the cloth well.
Pour Acrylic Colour - White on the palette, dilute the colour to about 25%, adding water using Fine Art round brush. Fill the diluted colour in thw design marked (a), the filling should be neat and uniform.
Pour Acrylic Colour - White on the palette, dilute the colour to about 15%, adding water using Fine Art round brush. Fill the diluted colour in thw design marked (b) in the design.
After the colour dries, Using Fevicryl 3D Cone Outliner - White, outline the whole design completely.
On the area marked as (b), give line work using 3D Cone Outliner as shown in the picture.
On the plain area of the design (c) give lines as shown in the picture.
After the linear work dries, using Fabric Glue paste the cloth to the Jute, which has to be slightly bigger than the cloth. Note: This Lace technique can be done on Fabric and Non Fabric surfaces.
Gud work.
No comments