Sanitizer Tissue Pouch

Step 1

• This is how it will look on the other side of the pouch.

Step 2

• Once the sticking has dried, place the sanitizer bottle in the pocket on the front as shown.

Step 3

• Place tissues or hand kerchief in the pocket on the back.

Your portable sanitizer tissue pouch is ready to be taken along with you to your school, college, office safely tucked in your bag.

Step 4

• Measuring 3” in between, and 1.5” on the sides, fold it and stick the top and bottom.
• Refer to the image above.
• Use Fevicryl Fabric Glue to stick
• Let it dry.

Step 5

• Take two strips from the printed fabric measuring 6.25 “x 2”.
• Use fabric scissors to cut them.

Step 6

• Take a plain fabric as seen in the image above.
• Dye the fabric using Fevicryl Fabric Colour Black.
• Let it dry.
• You can skip this step and use black or any other colour fabric if it is available with you.

Step 7

Take any printed fabric

Step 8

• One the white fabric has been dyed cut them in to two pieces measuring 6” x 4”
• Use fabric scissors to cut them.
• Make sure to leave ½ inch extra fabric on all sides.

Step 9

• Take buckram and cut 6” x 4” using fabric scissors.
• Stick the buckram on to the black fabric piece using Fevicryl Fabric Glue.
• Let it dry.
• Stick the other black fabric on to the buckram stuck piece using Fevicryl Fabric Glue.
• Let it dry.
• Make sure to fold the edges to give the whole piece a good finish.

Step 10

• Take the printed fabric and measure 2.5” x 6 “.
• Keep ½ “extra on all sides. Cut it using fabric scissors.
• Fold the edges of the piece and stick it using Fevicryl Fabric Glue.
• Let it all dry
• Once dried, place it on the black piece as seen in the image above and stick the sides and the bottom using Fevicryl Fabric Glue.
• Do not stick the top as we are creating a pouch.
• Let it all dry

Step 11

• Take two strips from the printed fabric measuring 6.25 “x 2”.
• Use fabric scissors to cut them.

Step 12

This is how it will look on the other side.